Twin Stim 2nd Edition - TENS & EMS Combo
The Twin Stim 2nd Edition Digital TENS & EMS Combo is a portable, easy-to-use device, combining TENS (Transcutaneous Electrical Nerve Stimulation) with EMS (Electrical Muscle Stimulation) electrotherapy, allowing many options to address pain.
- Relieve your pain by using the TENS Mode.
- TENS is a non-invasive, drug free method to control your pain by sending tiny electrical impulses through the skin to target the nerves. In many cases, this stimulation will greatly reduce or eliminate pain.
- Strengthen your muscles by using the EMS Mode.
- EMS is widely used in hospitals and sports clinics to treat muscle injuries, to re-educate paralyzed muscles, and to prevent atrophy in affected muscles.
Product Features:
- Channels: Dual Channel
- Pulse Amplitude: Adjustable, 0-100 mA
- Voltage: 0 - 50V (Load: 500 ohm)
- Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step
- Pulse Width: Adjustable, from 50 to 300 microseconds, 10µS/step
- Wave Form: Asymmetrical Bi-Phasic Square Pulse
- On Time: Adjustable, 2~90 seconds, 1 Sec./ step
- Off Time: Adjustable, 2~90 seconds, 1 Sec./ step
- Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, The "On" time will increase and decrease in the setting value.
- Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours.
- Timer: Adjustable, from 5 to 60 minutes or Continuous. Adjustable in 5 minutes each step. Treatment time counts down automatically.
- 1 Year Manufacturer Warranty
- Package comes with everything you need to start treatment right away.
- 1x Twin Stim 2nd Edition Stimulator
- 45" Lead Wires
- 1x Pack of Four High Quality Self-Adhesive Electrodes
- 1x 9V Battery
- Hard Plastic Carrying Case
- Instruction Booklet
Product Specifications:
- 2 EMS Modes:
- Synchronous: Stimulation of both channels occurs synchronously. The "ON" time including "Ramp Up" and "Ramp Down" time. Therefore, the setting of ON Time should be no less than two times of the "Ramp" time in this mode. ON TIME Ramp up + Ramp down
- Alternate: The stimulation of CH2 will occur after the 1st contraction of CH1 is completed. In this mode, the setting of ON Time should be no less than two times of the "Ramp" time. The OFF Time should be equal to, or more than, the ON Time. ON TIME Ramp up + Ramp down OFF TIME ON.
- 5 TENS Modes:
- Burst Mode (B): Burst rate: Adjustable, 0-5 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz
- Normal Mode (N): The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value.
- Modulation (M) mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300S) are fully adjustable.
- The SD1 (Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300S) are fully adjustable.
- The SD2 (Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300S) are fully adjustable.
We strive to ship your order using the fastest and most reliable methods available to us. When your order ships out you will be notified with an email containing tracking information. Please track your package on carrier's website or by calling them for a smoother experience.
Please allow a few days for orders to process. Our employees work very hard to ship every order out as soon as possible.
Smaller items typically ship within 2 to 5 days. Larger items can take 2 to 4 weeks. Please consult with a sales specialist for a more exact time frame.
All smaller items or supply orders are shipped via UPS Ground or USPS unless otherwise directed. UPS and USPS Delivery policies apply. All prices are FOB Shipping Point and Shipping Charges are added to invoice according to the Terms agreed upon by between Supplier and Customer.
For Large or Heavy Items we use LTL Freight Shipping and Contracted Shipping. Contracted Shippers may not have tracking numbers as these are smaller family companies. We do have direct contact with any contracted shipper. Please contact US MedRehab directly with any questions regarding contracted shippers.
We offer full install and setup of certain items. Please contact us at 1-314-207-9403 ext 1 for more information on full setup options.
Please call our Customer Service Department to discuss any special handling requests and applicable charges in advance of order placement.
US MedRehab is the preferred source in therapy equipment, education and service. Through our direct relationships with industry-leading manufacturers, we are able to offer new & used solutions to any equipment needs. Our experts are here to assist you in every step along the way from pre-sale info to post-sale support & education. We also have a dedicated team that specializes in technical service, repair and annual calibration checks to make sure your equipment is always working properly.
Our core product lines are offered across 8 different categories: Clinical Supplies, Modalities, Evaluation, Home Medical Equipment & ADL, Fitness, Tables & Furniture, Orthopedics, and Certified Pre-Owned (CPO) Equipment.
Delivery Policy: All supply orders are shipped via UPS Ground or USPS unless otherwise directed. UPS and USPS Delivery policies apply. All prices are FOB Shipping Point and Shipping Charges are added to invoice according to the Terms agreed upon by between Supplier and Customer. (see below for our Motor Freight Policies)
Shipping Locations: Headquarters - St. Louis, MO, Warehouses in New York, Ohio and California.
Freight Policy: For all non-Standard Ground shipments, please call for a Freight Quotation. All merchandise is carefully packed and inspected before leaving our facility or that of the manufacturer / drop-ship point. Responsibility for its safe delivery is assumed by the carrier upon acceptance of the shipment. Claims for loss or damage sustained in transit must be made to the Motor Freight Carrier. Visible loss or damage must be noted on the freight bill and signed by the carrier’s agent. Failure to adequately note and describe external evidence of damage may result in the carrier refusing to honor a damage claim. Contents of the packages(s) must be inspected immediately. Concealed loss or damage means loss or damage which does not become apparent until the merchandise has been unpacked. When damage is discovered, submit a written request for inspection by the carrier’s agent within fifteen days of the delivery date. All packing material must be saved for inspection so that a proper claim may be filed. Damage is the carrier’s responsibility. By following the instructions, we guarantee our full support of your claims to protect you against loss or concealed damage. Please feel free to call our Customer Service Department for further directions about initiating this process with the Motor Freight Carrier.
Specialized Handling and/or Order Expediting: Please call our Customer Service Department to discuss any special handling requests and applicable charges in advance of order placement.
Return Policy: All returns must have a RGA number applied (Returned Goods Authorization). An RGA number may be obtained through our Customer Service Department. US MedRehab honors the warranty of the original manufacturer, and defective products that cannot be repaired on-site will not be charged a restocking fee. Non-defective products can be returned within 30 days after shipment if ordered in error and may be subject to a 25% restocking charge to cover handling and transaction costs. Non-defective products cannot be returned after 30 days post shipment delivery. All non-defective, returned items must be in saleable condition, accompanied by the original packaging material. No returns, exchanges or refunds will be accepted on custom or special ordered items.